Sub address transmission, Sub address transmission -14 – TA Triumph-Adler P-C3065 MFP User Manual
Page 79
5-14
Using Convenient Fax Functions > Sub Address Box Function
Sub Address Transmission
To specify a Sub Address Box when sending a fax, follow the steps below.
For the setting method when the machine receives originals, refer to the following:
Sub Address Box Function (page 5-8)
1
Select the [FAX] key.
2
Place the originals.
3
Specifying destination.
Enter the fax number of the receiving system using the numeric keys.
4
Configure the function.
1
[Detail] > [Sub Address] > [Edit]
2
Enter the sub address using the numeric keys.
3
Select the [OK] key.
4
Enter the sub address password using the numeric keys.
5
[OK] key > [OK] key
5
Send Start.
Check the destination and press the [Start] key.
NOTE
To use sub address transmission, check that a sub address and password have been set in the receiving system in
advance.
Encrypted transmission cannot be used in sub address transmission.
NOTE
When a sub address has been registered to the destination of the Address Book, you can
use the destination. When a sub address-registered destination in the Address Book is used
for a One Touch Key, you can also use the One Touch Key.
NOTE
You can use up to 20 digits including the numbers from 0 to 9, ‘ (space)’, ‘#’ and ‘*’
characters to enter a sub address.
NOTE
You can use up to 20 digits including the numbers from 0 to 9, ‘ (space)’, ‘#’ and ‘*’
characters to enter a sub address password.
NOTE
When On is selected in Check beforeSend, a confirmation screen is displayed for the
entered FAX number.