TA Triumph-Adler P-C3565i MFP - Manual (Page 20)

2-7
Before Using the Fax Machine > Quick Setup Wizard (Fax Setup)
Quick Setup Wizard (Fax Setup)
In quick setup mode, a wizard is used to configure the following settings. Be sure to complete the settings before using
the fax system.
Fax setup items
Default fax settings (page 8-2)
Step Setting item Description
Reference
Page
1.Dialing/RX Mode Dialing Mode Select the dialing mode according to the line type. 8-7
Reception Mode Select the reception mode. 8-8
Auto (DRD) Select the reception pattern. 8-8
2.Local Fax Info. Local FAX Name Register the local fax name printed on the fax on the receiving
system. 8-7
Local FAX Number Enter the local fax number to be printed on the fax on the
receiving system. 8-7
Local FAX ID Enter the local fax ID. The local fax ID can limit other parties
with which you can communicate. Enter the four-digit local
FAX ID number. 8-7
TTI Select whether or not to print the local fax information on the
fax on the receiving system. 8-7
3.Sound Speaker Volume Set the volume when selecting [On Hook].
Speaker Volume: Volume of the built-in speaker when the line
is connected by selecting [On Hook]. 8-5
Monitor Volume Set the monitor volume.
Monitor Volume: Volume of the built-in speaker when the line is
connected without selecting [On Hook] such as in memory
transmission. 8-5
Job Finish Buzzer Emit a sound when a print job is normally completed. 8-5
4.Rings Normal Set number of times to let phone ring before answering a call. 8-8
Answering Machine Set number of times to let phone ring before taking over from
the answering machine. 8-8
FAX/TEL Switch Set number of times to let phone ring before switching the FAX
and the phone. 8-8
5.Redial Retry Times Set the number of redials. 8-7
NOTE
The settings can be changed in the system menu.