Enfora GSM2218 - Manual (Page 11)

GSM2218PB001MAN - GSM/GPRS MT-GL User Manual Page 4
Copyright 2005, Enfora L.P
2 Installation
Instructions provided in this section describe the hardware installation of the MT-GL device. To install
the MT-GL in a vehicle, follow these steps:
• Choose a convenient location in the vehicle – either in the trunk or interior of a vehicle. Avoid
locations that might expose the device to excessive heat or moisture.
• Hold the MT-GL in place and mark the location for mounting screw holes
• Using the markings as a guide, drill mounting holes in those positions
• Align the MT-GL in the drilled holes and secure it with mounting screws
!
The MT-GL is NOT a waterproof or sealed device.
Care must be taken to ensure the device is kept away
from water or any other liquids.
2.1 Mounting Dimensions
Figure 3 - Mounting dimensions of a MT-GL (Shown with mounting plate)