Enfora GSM2218 - Manual (Page 17)

GSM2218PB001MAN - GSM/GPRS MT-GL User Manual Page 10
Copyright 2005, Enfora L.P
The customer can also build their own cable, if they choose. The following information contains
photographs and the manufacturer’s (AMP/Tyco) part numbers for the parts needed to build the
cable. Enfora recommends using 20-gauge wire when building the connector.
Pin Housing (2-87499-1)
Pins (8523-6)
NOTE: Instead of using the previous two parts, you can build the cable using the
Wago 733-112 connector (Enfora part number CON-3000-0112.) This connector is
keyed, so the user won’t be able to insert the connector into the MT-GL the wrong
way.