Troubleshooting – Subaru Robin EH72 LP/NG User Manual

Page 23

Advertising
background image

- 20 -

8. TROUBLESHOOTING

The following three conditions must be fulfilled for satisfactory engine start .

(1) The cylinder filled with a proper fuel-air mixture .
(2) Good compression in the cylinder .
(3) Good spark, properly timed, to ignite the mixture .

The engine cannot be started unless these three conditions are met .
There are also other factors which make engine start difficult, e .g ., a heavy load on the engine

when it is about to start at low speed, and a high back pressure due to a long exhaust pipe .
The most common causes of engine troubles are given below:

8-1 NO ENGINE OPERATION

Phenomenon

Possible causes

Remedy

1 . Electric starter

does not

operate .

1) Poor connection of key switch wiring

Check, repair or replace

2) Wiring discontinuity between key switch and starter motor Replace

3) Wiring discontinuity between battery and starter motor

Replace

4) Improper battery (low capacity) or discharged battery

Charge or replace battery

5) Poor connection of battery terminal

Check, clean or replace

6) Starter magnetic switch faulty

Check, clean, repair or replace

7) Starter motor faulty

Repair or replace

8) Crankshaft seizure

Check, repair or replace

9) Seizure between piston and cylinder

Check, repair or replace

2 . Electric starter

operates, but

engine does

not start .

1) No fuel

Refill

2) Poor connection or discontinuity of ignition system wirings Check, repair or replace

3) Electric starter faulty

Repair or replace

Advertising
This manual is related to the following products: