Eton E1 - Manual (Page 23)

XM
This menu can be reached only when the XM Digital Antenna has been attached, and the receiver is operating in XM
mode. It can be accessed from the MAIN MENU when in XM mode by pressing the ‘6' key. It can also be reached by
repeatedly pressing the MENU softkey. This will scroll through the RADIO SETTINGS, AUDIO SETTINGS, SET CLOCKS,
CLOCK MODES and TIMERS menus, and finally, the XM menu.
If the optional XM digital antenna is not attached or if the unit is not operating in the XM mode, an error beep will
be heard and “ERROR” will appear on the screen if you attempt to access the XM menu from the MAIN MENU. If
you scroll through the available menus using the MENU softkey, the XM menu will not appear.
The XM menu appears as shown in the following illustration.
44 45
E1 MENUS continued E1 MENUS continued
E1 MANUAL
the display.
• Press ‘XM’. “XM” appears in the reverse video curser.
• Press ‘0', ‘7', ‘6'. The curser should now appear as ” XM 076 “.
• Press ‘STORE’. A confirming beep should be heard, the menu numbers should reappear, the reverse video curser,
the XM and MEMORY labels and “ENTER NUMBER & PRESS “STORE” TO ENTER” should disappear.
7. MAIN MENU - Pressing the ‘7' key returns the user to the main menu as described previously.
8. MORE - Scrolls forward through available menus as described previously.
9. EXIT - Exits the menu loop and returns to the VFO, MEMORY, COUNTRY, or XM display.
TIMERS
This menu is used to set the ON time, OFF time, and associated MEMORY, COUNTRY, or XM channel (if equipped) for
timers 1 and 2. It is reached by pressing the ‘8' (MORE) key from the CLOCK MODES menu or the ‘5' key from the
MAIN MENU. It appears as is shown in the following illustration.
TIMERS
1. TIMER 1 ON TIME - Press ‘1' to set the start time for timer number 1. When ‘1' is pressed, the menu numbers
will disappear, “ENTER NUMBER & PRESS “STORE” TO ENTER” will appear at the bottom of the display, and the
timer 1 start time window will change to reverse video. To set the time, enter the numbers on the ‘Direct-Key-Input’
keypad. When the numbers have been entered, press the ‘STORE’ key. This will cause a beep to be heard, the menu
numbers will reappear, and the timer 1 start time window will change back to normal video, indicating that the start
time has been stored in memory.
Example: Enter a start time of 11:30 for Timer 1
• Press the ‘1' key. Menu numbers will disappear and the time entry window for Timer 1 will appear in reverse video.
• To enter 11:30 hours, press ‘1', ‘1', ‘3', ‘0' on the ‘Direct-Key-Input’ keypad.
• Press the ‘STORE’ key. You will hear a confirming beep, the entered time will return to normal video and the menu
numbers will reappear.
2. TIMER 1 OFF TIME - Press ‘2' to set the off time for timer 1. Proceed in the same manner as in 1 above.
3. TIMER 1 MEM CH - Using the same technique as in 1 and 2 above, key in the number of the MEMORY or
COUNTRY channel that you want the E1 receiver to receive when timer 1 activates. Note that on an XM equipped
receiver, when ‘3' or ‘6' are pressed, the labels “XM” and “MEMORY” appear on the right side of the screen. Press
the ‘XM’ softkey to enter an XM channel or press the ‘MEMORY’ softkey to enter a MEMORY or COUNTRY channel
prior to actually keying in the number.
4. TIMER 2 ON TIME - Press ‘4' to set the start time for timer number 2.
5. TIMER 2 OFF TIME - Press ‘5' to set the off time for timer number 2.
6. TIMER 2 MEM CH - Press ‘6' to set the number of the MEMORY, COUNTRY, or XM channel that you want the
etón E1 to receive when timer 2 activates. For example, to set the E1 timer 2 to receive XM channel 76, proceed as
follows:
• Press ‘6'. Menu numbers disappear, a reverse video curser appears at menu item 6, “MEMORY” and “XM” labels
appear on the right of the display, and “ENTER NUMBER & PRESS “STORE” TO ENTER” appears at the bottom of