Eton E1 - Manual (Page 28)

54 55
SETTING TIMER ON/OFF TIMES
Enter the TIMERS menu by pressing the ‘MENU’ key to reach MAIN MENU, and then pressing the ‘5' key on the
‘Direct-Key- Input’ keypad. This brings up the TIMERS menu as shown below.
TIMERS
(1) Press ‘1' on the ‘Direct-Key-Input’ keypad. This will cause the menu numbers on the left to disappear and the ON
time entry for TIMER 1 will turn to reverse video, as shown here: “TIMER 1 ON TIME 11:30“
(2) Key in the desired ON time for TIMER 1, ignoring the colon. For example, for an ON time of 18:41, press the fol-
lowing keys: ‘1', ‘8', ‘4', ‘1'. The TIMER 1 ON TIME curser will now show “18:41”.
(3) Press ‘STORE’ to save the TIMER 1 ON time in memory. You will hear a beep, the reverse video window will
change to normal video, and the menu numbers will return.
To set the OFF time for TIMER 1, select item 2 from the menu by pressing ‘2' on the ‘Direct-Key-Input’ keypad and
follow the same procedure as you used to set ON time.
SETTING A WAKE OR SLEEP TIMER
If you want a timer to act as a wake timer only, you would program an ON time and clear an OFF time. This will
cause the receiver to turn on at the designated time and stay on until turned off manually.
If you want the timer to act as a sleep timer only, you would clear any existing ON time and program an OFF time.
This will cause the receiver to turn off at a designated time and stay off until turned on manually.
To program only an off time, or only an on time, clear the unwanted time on the selected timer as follows:
(1) Select the timer ON time or OFF time to be cleared by pressing the ‘Direct-Key-Input’ keypad key corresponding to
the menu number of the desired timer ON time or OFF time. This will cause the menu numbers to disappear and a
reverse video curser to appear on the selected timer ON time or OFF time.
(2) Press the ‘CLEAR/LOCK’ key on the ‘Direct-Key-Input’ keypad. This will cause the numbers in the reverse video
curser to disappear. Only the colon will remain.
(3) Press ‘STORE’. This will cause the reverse video curser to disappear, a beep will be heard, the menu numbers will
reappear, and the null time information will be stored in memory.
SETTING TIMER MEMORY CHANNELS
To set the memory channel on the E1 receiver which will be activated by TIMER 1, press ‘3' on the ‘Direct-Key-Input’
keypad, and then key in the number of the MEMORY or COUNTRY channel.
For example, assume you want TIMER 1 to activate COUNTRY channel 1460.
CLOCK AND TIMER FUNCTIONS continued CLOCK AND TIMER FUNCTIONS continued
E1 MANUAL
• Press ‘3' for “TIMER 1 MEM CH”. You will see a reverse video curser appear.
• Press ‘1', ‘4', ‘6', ‘0'.
• You will see “TIMER 1 MEM CH 1460“.
• Press the ‘STORE’ key to save this entry in memory.
• You will hear a beep, the reverse video curser will go away, the menu numbers on the left will return, and the
entered COUNTRY channel will be stored in the TIMER 1 memory. To set the memory channel in XM mode, the
menu and the procedure is slightly different. For example, assume you want timer 1 to activate XM channel 73.
• Press ‘3' for “TIMER 1 MEM CH”. You will see a reverse video curser appear AND you will see “XM” and “MEMO-
RY” labels appear by two of the keys at the right of the display as shown in the “TIMERS” illustration which fol-
lows.
MENU – TIMERS
• Press the XM key. You will see “XM” appear in the reverse video curser.
• Press ‘0', ‘7', ‘3'.
• You will see “TIMER 1 MEM CH XM 073“
• Press the ‘STORE’ key to save this entry in memory.
• You will hear a beep, the reverse video curser will go away, the menu numbers on the left will return, and the
entered XM channel will be stored in the TIMER 1 memory.
If it is desired to set TIMER 2, use the same procedure as that for TIMER 1. If you want TIMER 1 or TIMER 2 to turn
on the receiver to what ever frequency was tuned in last, simply clear the channel information from the respective
TIMER 1 MEM CH or TIMER 2 MEM CH as follows:
• Press the TIMERS menu ‘3' or ‘6' as desired on the ‘Direct-Key-Input’ keypad. This will cause the selected menu line
to display a reverse video curser, and the menu line numbers will disappear. Assuming menu item 3 for TIMER 1
was selected, the line will appear as follows: “TIMER 1 MEM CH 1460“.
• Press the ‘CLEAR / LOCK’ key on the ‘Direct-Key-Input’ keypad. This will produce a beep and will cause any num-
bers in the reverse video curser to disappear.
• Press the ‘STORE’ key. This will cause another beep, the menu numbers will reappear, the reverse video curser will
disappear, and this null information will be stored in memory, Use this same procedure if you choose to store null
information for TIMER 2.
To exit the timer menu and go back to a normal operating mode, press ‘9' on the ‘Direct-Key-Input’ keypad.