Eaton Electrical PXES4P Series - Manual (Page 27)

PXES4P Switches Installation and User Guide (10/06)
26
Example : In this application in an expanding Industrial network environment, the new
PLC units are deployed on all the present networks and need an Ethernet port to carry the
data to the main workstation being controlled by the Industrial Engineering crews. The
hardened version of PXES4P are typically used where 10/100BASE-T networking
equipment is being installed in highly controlled temp environments and require an
effective and economical solution to satisfy the need.
3.0 INSTALLATION
This section describes the installation of the PXES4P Series Switches, including
location, mountings, power supply and media connection.
3.1 Locating the Convenient Switch Unit
All the PXES4P Series Switches operate in transparent half-and full-duplex mode. The
store and forward switch easily take care of the network traffic and can be used as a useful