EverFocus EDSR-400 - Manual (Page 31)

MENU
26
6.15 SYSTEM SETTING MENU
(1) PLAY WITH AUDIO: AUDIO-1, AUDIO-2
ON/OFF: Play back with or without audio.
(2) PLAY SPEED: Set the playback speed. Maximum 60 (NTSC) / 50 (PAL).
(3) PASSWORD ENABLE: Enable/Disable the password protection. Once you enable the
password, the default value is Level-1 (Lowest level) for live view
only (CH keys, MODE, SEQ and ZOOM buttons). Default: 111111
(4) PASSWORD LEVEL-2: (General): Live and Playback view. (Limited: MENU and CALL
buttons, Event Log List and Display Setting). Default: 222222
(5) PASSWORD LEVEL-3 (Highest): All buttons and configuration. Default: 333333
Note: Press SELECT button for around 3 seconds to logout the system and return to level-1.
(6) MULTI-EVENT DWELL: Define the dwell time when there are more than one event triggered at the
same period.
(7) SYSTEM UPDATE: Select YES/NO for updating system.
YES: Download the update S/W into C.F card through your PC and insert the CF card
into the slot on the front panel of DVR. Press ENTER key to start.
Notice: After the system is successfully updated, please reboot the system.
(7) LOAD DEFAULT: Select YES/NO to load factory default setting, necessary after update.
In the SYSTEM SETTING MENU, we define
SYSTEM SETTING MENU
PLAY WITH AUDIO-1 : ON
PLAY WITH AUDIO-2 : ON
PLAY SPEED : 50 IPS
PASSWORD ENABLE : DISABLE
PASSWORD LEVEL-2 : 222222
PASSWORD LEVEL-3 : 333333
MULTI-EVENT DWELL: 02 SEC
SYSTEM UPDATE: NO
LOAD DEFAULT: NO
Pic 2
1 2 3 4 5 6 7
8 9
For password Input, you may use
the CH keys (Pic 1) or following
function keys (Pic 2).
Pic 1
Turn the JOG dial clockwise or counter-clockwise to select the options.
Press MENU key to return to Main Menu, press again to leave Set up Menu.
MENU
Press ENTER key to confirm the option and move to next column.
ENTER
CALL
Press CALL key to confirm the option and move to previous column.