SAF-HOLLAND XL-FW10054UM FWS1 and FWS2 Series Fifth Wheels - Manual (Page 16)

16 XL-FW10054UM-en-US Rev B · 2012-03-09 · Amendments and errors reserved. © SAF-HOLLAND, Inc.
Figure 30
Figure 32
Figure 31
Maintenance Procedures
5. Rotate lock tester out of the way and
measure distance between scribed lines.
If distance between lines exceeds 1/8",
the lock should be adjusted tighter
(Figure 30).
6. To adjust lock:
t

8JUI
MPDL
UFTUFS
TUJMM
MPDLFE
JO
GJGUI

wheel, lift up on fifth wheel ramps
and rotate fifth wheel to its forward
most position (towards cab).
t

3FNPWF
DMJODI
QJO
GSPN
CPUUPN
PG

lock adjustment pin (Figure 31).
t

-JGU
MPDL
BEKVTUNFOU
QJO
BOE
SPUBUF

clockwise to the next adjustment
position shown on the face of fifth
wheel (Figure 32).
t

1VTI
MPDL
BEKVTUNFOU
QJO
JOUP
GJGUI

wheel in the new position.
t
3FQMBDF
DMJODI
QJO
7. Re-check for free play in the locks by
repeating Steps 3-5. If free play still
exceeds 1/8", repeat Step 6 and rotate
lock adjustment pin one more notch.
NOTE: If free play greater than
1/8" remains with the lock
adjustment pin on the last
(fourth) position, then the fifth
wheel should be rebuilt using
rebuild kit RK-FWS-A-L.
.&"463&
%*45"/$&

#&58&&/
-*/&4
$-*/$)
1*/