Operating instructions, Fifth wheel inspections, Open – SAF-HOLLAND XL-FW418-01 FW83 LowLube Fifth Wheel User Manual

Page 3: Closed, Do not

Advertising
background image

3

OPERATING

INSTRUCTIONS

UNLOCK
NOTCH

LOCK NOTCH

1st

2nd

3rd

TILT

DOWNWARD

FIFTH WHEEL INSPECTIONS

1. Inspect the fifth wheel and mounting.

Confirm that the lube plates are
in place and firmly attached.

Tighten loose fasteners.

Replace missing fasteners.

Repair/replace missing, cracked or
otherwise damaged components.

2. Make sure the lock is open. To open lock, pull secondary

lock handle and hook on casting if equipped.Then pull
primary release handle as shown.

3. Inspect the lock jaw; if it appears dry,

apply grease to lock jaw and front of
throat directly, or through the lube
tube grease fitting located near the
front, left side of the fifth wheel.

4. Tilt the ramps down.

OPEN

“Ready to Couple”

CLOSED

Wheel is Locked!

DO NOT

Attempt to Couple!

LUBE
TUBE

XL-FW418-01 Rev C

Advertising
This manual is related to the following products: