Cb-2300 model nomenclature – SAF-HOLLAND XL-AS11406OM CBX/CB Series Fixed Frame Top Mount Trailer Air Suspension User Manual

Page 8

Advertising
background image

8

XL-AS11406OM-en-US Rev B · 2012-06-29 · Amendments and errors reserved. © SAF-HOLLAND, Inc.

Model Identification & Nomenclature

7. CB-2300 Model Identification

The CB-2300 suspension serial tag is located on the frame
bracket

(Figure 10).

NOTE: Refer to the serial number tag attached to the slider

rear crossmember for information

(Figure 10).

NOTE: If the suspension serial tag is not legible or is not

available, you can identify your suspension model
by the appearance of the equalizing beam. The
CB-2300 model will have a full cast beam with
a 5" round axle

(Figure 10).

NOTE: This manual applies to the suspension models

listed on the front cover. However, we urge you to
determine your specific model number, write that
information below and refer to it when obtaining
information or replacement parts

(Figure 11).

8. CB-2300 Model Nomenclature

The sample tag shown will help you interpret the information
on the SAF-HOLLAND, Inc. serial number tag. The model number
is on the first line along with the suspension capacity. The
second line contains the part number and the serial number
(Figure 11).

Figure 11

Figure 10

CONSULT SPECIFICATION FOR CAPACITY AND RECOMMENDED APPLICATION.

MODEL NO.

PART NO.

CAPACITY (LBS)

SERIAL NO.

SAF-HOLLAND, INC.

CB 2300 - 14

Cast Beam Suspension

Axle Capacity
Suspension Series
23,000 lbs.

Ride Height
14˝ (356mm)
15˝ (381mm)
16˝ (406mm)
17” (432mm)

5"(-0$"5&%0/
5)&'3".&#3"$,&5

Advertising