Escient DVDM-100 User Manual
Page 33
PAGE 33
FireBall™ DVDM-100 User
’s Manual
Sony DVD/cD changer hookup
• Up to three Sony DVP-CX777ES 400 disc changers may be connected via individual RS-232 cables.
• An RS-232 cable is standard a DB9 null modem cable (not included with the changer)
• All audio outputs from changers should be connected to the FireBall
• The analog audio connection is required when recording from external changers
• Set each changer to address Command Mode 1.
Kenwood DVD/cD changer hookup
• Up to three Kenwood DV-5900 or DV-5050 400 disc changers may be connected via individual RS232 cables (do not daisy chain)
• Connect a 1/8” mono or stereo mini connector from the DVD Control jack on each changer to the corresponding S-Link/IR Input jack on the
back of the FireBall
• An RS-232 cable is standard a DB9 null modem cable (not included with the changer)
• All audio outputs from changers should be connected to the FireBall (do not daisy chain)
• The analog audio connection is required when recording from external changers
• Set each changer to address MAIN.
• Only CDs in Kenwood changer will appear in Fireball Music Guide.