Escient DVDM-100 - Manual (Page 86)

PAGE 86
FireBall™ DVDM-100 User
’s Manual
iNstAlliNG thE EtP touch PANEl
The optional Escient Touch Panel is an external 15” flat LCD color display that offers full control of a FireBall via it’s integrated touch sensitive
surface.
follow these steps to connect the EtP-1500 to a fireball:
1. Place the fireball into standby.
2. connect the Rs-232 serial cable to coM PoRt 4 on the rear panel of your fireball.
3. connect the other end of the Rs-232 serial cable to the bottom of the EtP-1500.
4. connect one end of an s-video cable to one of fireball’s two s-video outputs.
5. connect the other end of the s-video cable to the s-video input on bottom the EtP-1500.
6. connect the EtP-1500 to an Ac power source.
7. Press the power button on the front panel of the EtP-1500. the lEd will turn amber.
8. Power on the fireball, the lEd on the touch panel will turn green.
The ETP-1500 will automatically be detected on COM PORT 4 and the user interface will display the touch panel buttons around the perimeter of the
screen.