E&J EJ777-2 - Manual (Page 14)

14 EJ777-2-INS-LAB-RevA10 • EJ777-2 Transport Chair
ARM
Rotate arm up for transfer (see pictures below)
To rotate the arm backward for transfer:
1. Rotate the release lever down.
2. Hold arm by the front post and rotate it up and back.
arm, locked arm, unlocked arm, rotated
release
lever
front
post front
post
release
lever
arm
receptacle
Rotate arm down to reinstall (see pictures above)
To return the arm to operation position:
1. Rotate the arm forward and down into the arm receptacle.
2. Rotate the release lever up to lock front of arm into place.
Note: Front of arm must be fully down and engaged in the arm receptacle or the release
lever will not lock into place.
WARNING: Ensure that arms are locked into place before occupying or operating
Transport Chair.