Epson 3100Z - Manual (Page 94)

5-8 Using Images on Your Computer
L Proof Sign-off:
K. Pipa CRE Tsutagawa
K. Pipa
CRE R. Hopley R4C7850
Rev. C
A5 size COMPUTER.FM
4/27/01 Pass 3
1. Start EPSON CameraStarter as described below.
In Windows
Click Start, point to Programs, then to EPSON
Camera and then to ESPON Photo!4, then click
EPSON CameraStarter.
On a Macintosh
Double-click the EPSON Photo!4 folder, then
double-click the EPSON CameraStarter icon.
The EPSON CameraStarter dialog box appears.
2. Click the Settings button.
3. To make EPSON CameraStarter open
automatically when you connect a PhotoPC
3100Z containing a memory to your computer, or
when you insert your memory card into your
EPSON printer’s PC Card slot, click the Show
EPSON CameraStarter button.
If you want CameraStarter to open automatically
when you insert your memory card into a PC
Card slot of a device other than your printer, such
as your computer or a memory card reader, select
the Monitor card insertion into Card Reader
slots check box.
Note:
Never insert or remove a memory card from your
camera while the camera is on. For instructions on
connecting your camera to your computer, see
“Connecting the camera to your computer” on page
5-9.
If you do not want EPSON CameraStarter to open
automatically, click the Ignore the Event button.
4. Click OK, then click Exit.
Note:
The Settings button is unavailable if EPSON
CardMonitor is not installed.
Connecting and Disconnecting the
Camera
Use the included USB cable to connect the camera to
the computer. When you camera is connected, you can
download or copy image and audio recording files to
the computer, or upload photo and audio recording
files saved in the computer to the memory card. Be
sure to properly disconnect your camera after you
finish using it. Follow the steps below.