Washing drum, Door seal, Drain pump – Electrolux 16850A User Manual

Page 25

Advertising
background image

5. Clean all parts of the washing machine,

especially the nozzles in the top of the

washing-in chamber, with a brush.

6. Insert the detergent dispenser drawer in

the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap

water containing iron.
Do not clean the drum with acidic descaling agents, scouring agents containing chlorine

or iron or steel wool.

1. Remove any rust deposits on the drum with a cleaning agent for stainless steel.

2. Run a washing cycle without any washing to clean off any cleaning agent residues.

Programme: Short Cotton Programme at maximum temperature and add approx. 1/4

measuring cup of detergent.

Door seal

Check from time to time the door seal and ob-

jects that could be trapped in the fold.

Drain pump

The pump should be inspected regularly and particularly if:

• the appliance does not empty and/or spin;

• the appliance makes an unusual noise during draining due to objects such as safety

pins, coins etc. blocking the pump;

• a problem with water draining is detected (see chapter “What to do if...” for more de-

tails).

WARNING!

Before opening the pump door, switch the appliance off remove the mains plug from the

socket.

Proceed as follows:

1. Unplug the appliance.

2. If necessary wait until the water has cooled down.

Care and cleaning

25

Advertising