DE DIETRICH DOP1180 - Manual (Page 5)

CARING FOR THE ENVIRONMENT • •
5
1 / NOTICES TO THE USER EN
CARING FOR THE ENVIRONMENT • •
— This appliance’s packing materials are
recyclable. Recycle them and play a role in
protecting the environment by depositing
them in local authority containers provided
for this purpose.
— Your appliance also contains
many recyclable materials. It is
therefore marked with this logo to
indicate that used appliances must
not be mixed with other waste.
Recycling of the appliances
organised by your manufacturer will thus be
undertaken in optimum conditions, in
accordance with European directive
2002/96/CE relating to electrical and
electronic equipment waste. Contact your
local council or your retailer to find out the
drop-off points for used appliances that are
nearest to your home.
— We thank you for your help in protecting the
environment.
Warning
Installation should only be performed
by qualified installers and technicians.
This appliance complies with the following
European directives:
- Low Voltage Directive 2006/95/CE for
affixing the CE mark.
- Electromagnetic Compatibility Directive
89/336/CEE modified by directive
93/68/CEE for attaching the CE mark.
- CE regulation 1935/2004 concerning
materials and objects intended for contact
with food substances.
This appliance is intended to be connected
to a main supply with maximum permissible
system impedance Zmax of 0.4372 Ohm at
the connection point.
User must ensure that main supply fulfills
the requirement above. If needed, the power
supply company can be asked for the
system impedance at the connection point.
— ( Depending on the model):
For your
safety, your oven is equipped with an
AUTOMATIC STOP, if you forget to turn off
your oven by mistake. After 23 hours and
30 minutes of continuous use, the AS
(Automatic Stop) feature will be activated and
your oven will turn itself off. AS or Auto Stop
will be displayed instead of the time and a
series of successive beeps will be emitted for
a short time.
- The main circuit supplying the oven must
have a single-pole cut-off switch with at least
3mm between contacts.
- Ensure the appliance is unplugged from the
mains before replacing the oven lam, to avoid
electric shock.
Warning
To avoid the risk of electric shock,
ensure the appliance is disconnected from
the power before replacing the lamp. Work
only when the appliance is cool.
Whether a external disturbance occurs in
mains the appliance can stop the current
cooking or cleaning cycle and the display
can be switched off for few seconds. After
that the program can be launched again by
the user.