Eagle Parts & Products LIBERTY 624 mini - Manual (Page 12)

10 11
LIBERTY™ 624 MINI POWER WHEELCHAIR
OPERATING INSTRUCTIONS
You have already examined the safe use of the LIBERTY™ 624 MINI. You now need to understand the
basic operation of the LIBERTY™ 624 MINI. These preferred methods are strongly recommended and
very simple to follow. Please read this section in its entirety to ensure a full understanding of operating
your LIBERTY™ 624 MINI.
Step 1. Getting started: To get started, press the on/off button. The battery condition meter will
illuminate indicating the present charge of your battery.
Step 2. Moving your powerchair: Guide the joystick in the direction you wish to move the powerchair.
The further you guide the joystick from the center, or neutral position, the faster the
LIBERTY™ 624 MINI will move.
The LIBERTY™ 624 MINI is equipped with an adjustment knob or mode switch depending on which
controller you have, that help you select the speed best suited to your requirements and environment.
• The speed control knob allows you to set the maximum speed of the LIBERTY™ 624 MINI to
your specific needs. To increase the maximum speed, turn the knob clockwise. To decrease the
maximum speed, turn the knob counterclockwise. (for pilot)
OPTIONAL PILOT (+) PLUS - CONTROLLER
• The pilot + controller (opt) uses a mode switch for increasing or decreasing the speed. To
activate, press the mode switch, time and speed mode lights will begin to flash. Next, push the
joystick to the right or left depending if you want to increase or decrease the speed. NOTE: THE
NUMBER LIGHTS. ONE LIGHT LIT- SLOWEST SPEED, FIVE LIGHTS LIT- FASTEST
SPEED.
Eagle Note : We recommend that the first few times you operate your LIBERTY™ 624 MINI, you
turn both the speed control and response control completely counterclockwise to allow you to become
familiar with your new powerchair.
The LIBERTY™ 624 MINI will always come to a complete stop and the brake will engage when the
LIBERTY™ 624 MINI joystick is released or moved to the neutral (center) position.
•
WARNING: Never use the on/off button to stop the LIBERTY™ 624 MINI. This will cause the
LIBERTY™ 624 MINI to stop immediately and possibly cause injury.