Eagle Parts & Products LIBERTY 624 mini - Manual (Page 25)

24 25
NOTE: EAGLE-LIBERTY OPTIONAL (SOLID-FLAT-FREE TIRES)
If you should encounter a flat tire on your LIBERTY™ 624 MINI please follow these easy stops for a
safe repair:
1. Completely deflate the tire.
2. Use a 7/16-inch wrench to remove the screw from the center hub of the flat tire.
3. Pull the wheel off of the power base.
4. Remove the tire from the rim using tire tools only, never use screwdriver this can cause damage to
the tire and rim.
5. Remove the old tube and/ or tire and replace with the new one.
6. Reinstall the tire with new tube back onto the rim.
7. Slide the wheel back onto the motor shaft. Apply thread lock compound to the screw and tighten
securely.
8. Inflate the tire to 30-35 psi.
NOTE: Replacement tires and tubes are readily available at the dealership where your LIBERTY™ 624
MINI was purchased or any authorized LIBERTY™ 624 MINI dealer.
Battery Replacement
The following are instructions to replace batteries if necessary. Refer to diagram on page. This diagram
is also printed on a decal on the LIBERTY™ 624 MINI frame near the battery tray.
1. Turn the power OFF.
2. Remove the seat.
3. Remove the body.
4. Remove the battery cables from the battery terminals.
5. Remove old batteries from the battery tray.
6. Install new batteries into battery tray.
7. Reconnect the battery cables to the battery terminals, following the diagram on page.