Epson R-D1s - Manual (Page 14)

14 Getting Started
Inserting a Memory Card
1. Make sure that the memory card is not locked. Slide the write
protect switch to unlock the card if needed.
2. Make sure that the memory card access light is off, then open the
memory card slot cover. Insert the memory card all the way into
the slot until it clicks.
3. Close the memory card cover.
Removing the Memory Card
1. Make sure the memory card access light is off, then open the
memory card slot cover.
2. Push in the memory card until it clicks, then release your finger.
The memory card pops out.
Note:
If the memory card is not ejected, push it again.
3. Remove the card and close the memory card cover.
Write protect
switch
DUMMY
DUMMY
DUMMY