Operating sequence, Load the laundry, Measure out the detergent – DE DIETRICH WBD1211 User Manual

Page 5: Measure out the liquid additive, Select the required option(s), Select the required programme, Start the machine

Advertising
background image

9

8

Operating Sequence

Washing only

Before the first wash, we recommend
that you run a cotton cycle at 60°C,
without any laundry in the machine, to
remove any manufacturing residue
from the drum and tub.
Pour 1/2 a measure of detergent into
the main wash compartment

of

the dispenser drawer and start the
machine.

1. Load the laundry

Open the door by pulling the door
handle outwards.
Place the laundry in the drum, one
item at a time, shaking them out as
much as possible. Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it
stops.
Measure out the amount of detergent
required and pour it into the main
wash compartment marked with the
symbol .

P0004

If you wish to carry out the prewash,
pour detergent into the compartment
marked .

Important
If using concentrated powder or liquid
detergents, a programme without
prewash must be selected.
Pour liquid detergent into the
dispenser drawer compartment
marked

just before starting the

programme or use the special
dispenser to be placed directly in the
drum.

3. Measure out the liquid

additive

If required, pour fabric softener into
the compartment marked

(the

amount used must not exceed the
“MAX” mark in the drawer).
When using thick concentrated fabric
softeners we recommend you dilute
the concentrate with water to ensure
trouble-free dispensing.
If using starch powder dissolve
according to manufacturer’s
instructions.

P0006

Close the drawer gently to avoid te
fabric conditioner entering de machine
prematurely.

4. Select the required

option(s)

Depress SPIN REDUCTION and/or
QUICK WASH and/or SUPER RINSE
or RINSE HOLD button, if required

QUICK

WASH

650

1200

P0005

5. Select the required

programme

Turn the programme selector dial
clockwise to the programme 2 or 1 if
you want to perform a prewash before
the main wash.

6. Start the machine

Before starting up the machine check
that:
• the appliance is plugged in;
• the water supply taps are turned on;
• the drain hose is correctly and

securely positioned;

• the door and the detergent

dispenser drawer are
closed.

Depress the ON/OFF button

: the

mains-on light will illuminate and the
machine starts operating.

P0045

P0379

2

Operating Sequence

Advertising