Installation, Required tools, Chapter 2: installation – Enterasys Networks SecureStack C2 C2RPS-POE User Manual
Page 21: Required tools -1, Chapter 2
Advertising
SecureStack C2 Installation Guide 2-1
2
Installation
This chapter provides the installation instructions to install all the components of a
C2RPS‐POE.
To correctly install the C2RPS‐POE, follow the order of information listed below.
Required Tools
A Phillips screwdriver is required to install the
C2RPS‐POE.
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de
instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und
qualifiziertes Personal vorgenommen werden.
For information about...
Refer to page...
Installing the C2RPS-POE on a Flat Surface
Advertising