EchoStar 44 - Manual (Page 12)

13
2. Select Check Switch or Test, depending on your
receiver model. The Check Switch screen will open.
Select Check or Test, depending on your receiver
model.
3. The Check Switch procedure will run. When it
finishes, you will see an Installation Summary screen.
•
For DISH Pro and DISH Pro Plus receivers, this
screen should identify the installed switch as a DISH
Pro Plus 44. You should see all of the satellites
received by your system on the Satellite line, and
the word All under the Dish Input numbers. You
should also see the message Satellite reception
verified.
Figure 3. DISH Pro Plus Installation Summary