Amprobe AT-4000 Series Advanced-Wire-Tracer - Manual (Page 19)

18
Battery Pack B2024
10V Converter/Recharger B2025
110V Pigtail - Banana Plug Cord Set C2901
Alligator - Clip Banana Plug Cord Set C2902
Grounding Test Lead 25-FT MTL-G
Alligator Clip VRC-320
Carrying Case AT-4000CON CC-AT-4000
Owners Manual www.Amprobe.com
Fuse 1000V 0.25A FA 6X46MM FA6X46MM
TRoUBLEShooTING
Symptom Possible Cause Solution
LCD Segments of the
T-4000 are fading 9V battery is low in
voltage Replace the battery
R-4000CON Can’t
detect signal a) Wrong Mode or
Range
b) Transmitter is OFF
or the signal level is
too low
c) Signal Cancellation a) Ensure that you
are using the right
mode or range.
(See application
notes)
b) Turn ON the
transmitter
and select the
appropriate signal
level.
c) Use a separate
ground or separate
the wires.