Amprobe AT-4000 Series Advanced-Wire-Tracer - Manual (Page 5)

4
PRECAUTIoNS
FOR PERSONAL AND INSTRUMENT PROTECTION
IMPORTANT:
Before using any electrical instrument, it should be checked to 1.
make certain it is operating properly.
In many instances, you will be working with dangerous levels of
2.
voltages and/or current, therefore, it is important that you avoid
direct contact with any uninsulated, current carrying surfaces.
Appropriate insulated gloves and protective clothing should be
worn.
Before attaching any of the conductors, make sure the voltage
3.
present is not beyond the range of the instrument.
When not in use, keep the instruments in their carrying case.
4.
When the R-4000CON or the T-4000 will not be used for a period 5.
of time, remove the battery to prevent leakage in the instrument.
INTRodUCTIoN
AMPROBE ATP SPX is dedicated to designing, manufacturing
and marketing high quality, reliable instruments for the skilled
professional. The AMPROBE ATP SPX current tracer has a history
of providing safe, reliable operation in tracing energized wires,
locating circuit breakers and locating wires shorted to the ground.
The AMPROBE ATP SPX open tracer has the capability of tracing
unenergized wires, locating open breakers and locating open wires.
The AT-4000CON Wire Tracer Upgrade System combines both the
current tracing CT- 100 and the AT-2000 series into one versatile tool
providing the ability to solve virtually all your tracing problems. In
addition to the above features, the receiver provides a non position
sensitive when tracing wire and the transmitter provides a visual
indication to the user when the traced line is energized. The level of
the signal transmission is also indicated on the LCD of the transmitter
unit.