Avago Technologies AcceleRAID 170LP - Manual (Page 44)

BIOS Configuration Utility (RAID EzAssist)
3-4 AcceleRAID 170LP Installation Guide
from the configuration on disk (COD).
BIOS Configuration Utility (RAID EzAssist)
RAID EzAssist is the on-board BIOS Configuration Utility used to build
several types of RAID configurations. Refer to the RAID EzAssist
Configuration Utility User Reference Guide or RAID EzAssist Configuration
Utility Quick Configuration Guide for instructions on starting and using this
utility.
Operating System
If an operating system is not already installed on the computer, it can be
installed on a system disk connected to the Mylex controller. The operating
system is installed along with the operating system device drivers.
Operating System Device Drivers
Device drivers that are compatible with the controller can be found in the
Software Kit. For details on how to install and load drivers, refer to the PCI
Disk Array Controller Drivers Installation Guide and User Manual available
on the CD-ROM.
Global Array Manager (GAM) Server
The Global Array Manager Server software supports a variety of operating
systems. For details on how to install GAM Server, refer to the Global Array
Manager Server Software Installation Guide and User Manual available on
CD-ROM.
Global Array Manager (GAM) Client
The controller can be configured using Global Array Manager Client. GAM
Client can also be used from the server or a system client to monitor status
and verify data integrity of disks connected to the controller while the system
and disks are running.
For details on how to install and run GAM Client, refer to the Global Array
Manager Client Software Installation Guide and User Manual.