Mpman PH100 - Manual (Page 11)

MPMAN PH100
11
 Modify the cell phone password: You can change the phone password.
 Privacy: If you select these modules for Data security, you must input the correct password when you want to view these modules.
 Lock screen by end-key: Activate, in the idle mode, you can use the power-key to lock the screen.
 Guard lock: You can track your phone when the phone lost; The default password is “123456”
 Fixed dialing: Add the numbers for fixed dialing.
 Black list: You can check the blacklist in here, and also can set the feature whether need to act on calling or messaging.
11.5. Profiles
Enter in the function; display the profile mode list including Normal, Silent, Indoor, Outdoor, earphone, Bluetooth and Driving mode.

Activate: Press OK key to activate the profile mode.
 Settings: Customize the profile mode.
Note: After plugging in the headset, ringtone will output from the headset as well as the phone, when there is incoming call or message.
11.6. Connections
 Network account: choice the network settings for data account before you want to use internet.
 GPRS Service: enable/disable the GPRS network.
 Data connection settings: You can control the internet access as “always connect” or “Connect when needed”.
 Network selection: choice the modes of searching the phone network, including Auto and Manual modes.
12. Appendix
The phone cannot be turned on: When the battery is very low, the phone may not be turned on properly. Please charge the battery.
My call is picked up by another phone: Check if call divert is set. If it is set, your incoming calls may be diverted to other numbers or devices.
No service
If you are in an area not covered by your network, or if a physical obstacle is present, such as in an enclosed area, the message “No service” will be displayed
on your Standby screen and you will not be able to make or receive calls. You can try move closer to a window for better reception.
For emergency only: When you are outside your network but inside other network, you can only make emergency call.
No Valid SIM card: Your SIM card is locked or it has an error. Please insert the right SIM card or contact your service provider.
Enter PUK code: After three consecutive incorrect PIN code entries, the code is blocked, and you need the PUK code to unblock it. Contact your service
provider.