Exergen Temporal Scanner 2000C - Manual (Page 13)

Changing the Battery
Blinking battery icon with temperature displayed:
battery is low but will still operate correctly.
Replace soon.
Blinking battery icon with 2 dashes: not enough
energy in the battery to measure correct temperature.
Replace battery.
Remove the battery compartment door by pushing
down on the ridges with your thumb, and pushing
away as indicated. Use both thumbs, if necessary.
Insert an alkaline 9-volt battery as illustrated, with
the positive (small terminal) always on the right.
Replace the battery compartment door as indicated,
with a push of your thumb on the ridges.
13
tat2000instrev6.qxd 2/6/2006 9:35 AM Page 13