PLANET ICA-230 - Manual (Page 4)


Chapter 2. ICA-108/ICA-108W – Wired/Wireless IR IP
Camera
2.1 Package Content
ICA-108 / ICA-108W x 1
Power Adapter x 1
CD Disk x 1
Antenna x 1 (ICA-108W only)
Quick Installation Guide x 1
Note
1. If any of the above items are missing, please contact your
dealer immediately.
2. Using a power supply with a different voltage that the one
included with the package will cause damage and void the
warranty.
2.2 Physical Installation
1. Connect an Ethernet cable
Connect the LAN cable on the ICA-108/ICA-108W to the network device (hub or
switch).
2. Attach the antenna (ICA-108W only)
Finds antenna in accessory and attaches the antenna to the ICA-108W SMA
connector.
3. Check the LED (Front Panel)
The LED is defined to identify LAN/WLAN connection type. When LAN port is
connected, the LED will be green. For WLAN model, if LAN ported is connected,
the LED will be green; if LAN cable is removed; the ICA-108W will change to
WLAN connection and LED change to orange color.
4. Place the ICA-108/ICA-108W on the table or fix it onto ceiling or wall
Use screws to fix the ICA-108/ICA-108W onto the ceiling or wall. You could also
put the ICA-108/ICA-108W in the table directly.
5. Attach the power supply
Plug in power adapter and connect to power source. After power on, ICA-108/
ICA-108W will start to operate.