PLANET ICA-230 - Manual (Page 7)


3.2.2 Rear Panel
Audio Output Jack
DC Power Jack
Factory Default Reset
LAN Socket
Audio Output
Jack Audio-out Jack allows this device to output audio or alerting
sound.
DC Power Jack
The input power is 12VDC.
NOTE: Only use the power adapter supplied with ICA-
M230/230. Otherwise, the product may be damaged.
LAN Socket
The LAN socket is a RJ-45 connector for connections to
10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This
Ethernet port built N-Way protocol can detect or negotiate
the transmission speed of the network automatically. Please
use Category 5 “straight through” cable to connect the ICA-
M230/230 to a 100Mbps Fast Ethernet network switch or
hub. The LAN socket is compliant with IEEE802.3af standard
PoE interface. Use of one power source (either 802.3af PoE
or 12VDC) is allowed.
NOTE: If you need to connect the ICA-M230/230 to PC or
notebook directly, you should use cross over cable instead.
Factory Default
Reset This button is hidden in the pinhole. Keep press this button
over will reset the IP camera into factory default.