Eiki EZ 250 - Manual (Page 8)

- 4 -
Preloaded Timers
The controller is preloaded with different timers that will turn off the projector after
a specified period. This function can be selected by pressing button 9 down for
30 seconds, after the button starts to blink, continue pressing the button down.
The button will blink once then pause for about 3 seconds then it will blink twice,
then pause for 3 seconds, etc. After you have arrived at the proper number,
release the button. Each set of blinks loads a different timer option:
One hour = One Blink
Two hours = Two Blinks
Three hours = Three Blinks
Four hours = Four Blinks
Five hours = Five Blinks
Six hours = Six Blinks
Seven hours = Seven Blinks
Eight hours = Eight Blinks
Nine hours = Nine Blinks
No timer = Ten Blinks