EdgeStar AP14009COM - Manual (Page 13)

EdgeStar Portable Air Conditioner 10
Remote Control Overview
1) Remove the cover on the back of the remote control.
2) Insert the batteries with the (+) and (-) ends pointing in the
correct direction.
3) Slide the cover back on.
Installing the batteries
Button Function
Power
Powers the unit on or off.
Fan Speed
Sets the fan speed. The Automatic,
High, Medium or Low
indicator will
appear depending on the mode you set.
Mode
Sets the mode. The Automatic,
Cool, Dehumidify and Fan
indicator will appear depending on the
mode you set.
(Down)
Decreases the Temperature, Timer, or
Clock settings.
(Clock)
Used to set the remote control clock
Timer
Used to enable the timer.
C/F
Switches the temperature between
Celsius/Fahrenheit
(Up)
Increases the Temperature Timer, or Clock
settings.
Power Button
Fan Speed Button
Mode Button
Down Button
Clock Button
Timer Button
Celsius/Fahrenheit Button
Up Button
LCD Display
C/F
CAUTION: Use only AAA batteries. Remove the batteries if the remote control will not be used for
one month or longer. Do not attempt to recharge batteries not designed to be recharged. All
batteries should be replaced at the same time. Do not mix old and new batteries. Do not dispose of
batteries in a fire as they may explode.