PLANET ATA-150 - Manual (Page 6)

1-2
STEP 1: Connecting Telephone
Using a telephone cable, connect
your telephone to the Phone port of
the Phone Adapter.
Step 2: Connecting Network and
Power AC Power
Connect the included Ethernet
network cable to the LAN port of the
Phone Adapter.
Connect the included power adapter
to the POWER port of the Phone
Adapter.
The PWR, LNK/ACT, and RING LEDs
will be solidly lit when the Phone
Adapter is ready for use.
Step 3: Basic Configuration & Administration Interface
Using for soft utility to search SIP ATA from current network.
The utility not only easy-to-use and provides user more
convenience for configuration access, at the some time if you
forget this IP address can also found that via the utility.
l
l
l
l
l