PLANET VGW-400FO - Manual (Page 6)

6
2.3 LED & Button definitions
LED definitions
LED Function Description
Power
When the power adapter is connected, the LED will light up
green.
Status When system starts up successfully, the LED will light up green.
Proxy
When the gateway is registered successfully to a SIP Proxy, this
will light up green.
WAN
This LED lights up green when the gateway’s WAN port is
physically connected to the public internet. When data is
transmitted through this port, it will flash green.
LAN
This LED lights up green when the gateway’s LAN port is
physically connected to a local network (Refer to Rear Panel
section). When data is transmitted through this port, it will flash
green.
Port 1 - 4
The status LEDs for FXO and FXS ports will light up amber orange
when connected phone is engaged in a conversation mode (FXO).
It will flash amber orange when there is an incoming call (FXS).
Button definitions
Port Function Description
Reset
Press and hold over 5 seconds to reload factory default setting.
This action will erase all existing settings configured on this
gateway.
FXS Ports
The status LED for FXS port will light up amber orange when the
connected phone’s handset is lifted, or when the connected phone
is engaged in a conversation. It will flash amber orange when
there is an incoming call.
FXO Ports
The status LED for FXO port will blink to remind you that there is
no PSTN line connected. When PSTN line is connected but not in
talking mode, the LED is OFF. When a line is using, the LED lights
up steadily.
LAN
10/100Base-TX RJ-45 socket for LAN port, connects to PC for
management purpose.
WAN
10/100Base-TX RJ-45 socket for WAN port, connects to wide area
network.
12V DC The power socket, input AC 100V~240V; output 12V DC, 1.5A