PLANET VGW-400FO - Manual (Page 7)

7
2.4 Placement
Make sure the device is placed in a safe environment to avoid equipment failure. l
DO NOT place anything on top of the device. Excessive weight could damage it. l
DO NOT obstruct ventilation slots on each side of the VGW-400 Series or expose l
it to direct sunlight or other heat source. Be sure that there is adequate air flow
around the VGW-400 Series.
Place the VGW-400 Series on a flat surface to avoid any damage. l
2.5 Physical Connection
4
Reset
WAN LAN
DC 12V
3 2 1
FXS FXO
100Base-TX UTP
Telephone wire
Video Phone IP Phone PC
Switch
ATA IP PBX
Router
SLT Phone Fax
PSTN
Internet
Physical Connection Topology of the VGW-400 Series