PLANET KVM-210 - Manual (Page 12)

12
5.3 Audio ( Speaker + Microphone ) Selection
5.3.1 (PC+Audio) Combination Selection
Hot Key:
[Scroll] ∞ [Scroll] ∞ [F1] ∞ [Enter] or [Scroll] ∞ [Scroll] ∞ [F2] ∞ [Enter] or
[Scroll] ∞ [Scroll] ∞ [F3] ∞ [Enter] or [Scroll] ∞ [Scroll] ∞ [F4] ∞ [Enter]
5.3.2 Single Audio ( Speaker + Microphone ) Selection
Hot Key:
[Scroll] ∞ [Scroll] ∞ [A] ∞ Enter] to enable or disable the audio auto switch mode
[Scroll] ∞ [Scroll] ∞ [A] ∞ [1] ∞ [Enter] to select PC1 Speaker and Microphone
[Scroll] ∞ [Scroll] ∞ [A] ∞ [2] ∞ [Enter] to select PC2 Speaker and Microphone
[Scroll] ∞ [Scroll] ∞ [A] ∞ [3] ∞ [Enter] to select PC3 Speaker and Microphone
[Scroll] ∞ [Scroll] ∞ [A] ∞ [4] ∞ [Enter] to select PC4 Speaker and Microphone
Note 1:
Note
Audio auto switch mode, the default setting of KVM switch is
enabled, means when you used the push button, the PCs and
Audio will be switched at the same time. In case of the Audio auto
switch mode is disabled, then the
push button only switch PCs.