PLANET KVM-210 - Manual (Page 6)


4. Installation
LED Indicators:
~ : RED LED indicates that the KVM Switch is selected to the corresponding PC.
� : GREEN LED indicates that the KVM Switch is ready to the corresponding PC.
Reset Switch:
Press this switch when a system reset. This switch must be pushed with a thin
object, for example, such as the end of a paper clip, or a ball point pen.
4.1 Single installation
Precaution:
1. With under running OS Windows 98 , we sugget that the PC must be plugged
to PS/2 ports, because of Windows 98 is not support installation at first time as
through USB HID installation driver.
2. There are some of older PCs can support USB ports during booting, but you
need to open BIOS USB setting at first.
Console connecting:
Plug your PS/2 keyboard, mouse and VGA video into the Console ports located on
the KVM Switch’s front panel.
System connecting:
Use KVM custom cable sets to connect any available PC ports to the video and
either USB or PS/2 ports alternatively, or even USB & PS/2 both all connected to
the computers you are connecting up.
Note
The custome cable set, as Fig. 1, is supplied cable set with this
package; any additional sets is required purchase separately.
To purchase the custom KVM cable sets, please contact with your dealer.
Fig. 1 combo custom 4-in-1 cable