ProSoft Technology MVI69-ADMNET - Manual (Page 50)

Setting Up Your Development Environment MVI-ADMNET ♦ 'C' Programmable
Developer's Guide 'C' Programmable Application Development Module with Ethernet
Page 50 of 122 ProSoft Technology, Inc.
February 20, 2013
6 The Ymodem File Send dialog box shows the file transfer size and remaining
time.
When the file has been transferred to the module, the dialog box will indicate
that the transfer is complete.
3.6.6 Uploading files from the ADM module to a PC
In order to upload files from the module, the ADM module’s running program
must be interrupted. You must run the SY.EXE program which uses the YModem
protocol.
1 In HyperTerminal, connect to the module at 57600 baud and type the
command to halt the program (for example [Esc] or [Ctrl][C]; your
application must be written to allow itself to exit to the command prompt on
request).
2 At the command prompt, type
C:\SY "filename.ext"
The filename and path must be in quotes.
3 From the Transfer menu in HyperTerminal, select Receive File. This action
opens the Receive File dialog box.
4 Use the Browse button to choose a folder on your computer to save the file,