ProSoft Technology MVI69-101S - Manual (Page 135)

Reference MVI69-101S ♦ CompactLogix or MicroLogix Platform
IEC 60870-5-101 Slave Communication Module
ProSoft Technology, Inc. Page 135 of 149
March 16, 2009
⌧ <46> := Double command C_DC_NA_1
⌧ <47> := Regulating step command C_RC_NA_1
⌧ <48> := Set point command, normalized value C_SE_NA_1
⌧ <49> := Set point command, scaled value C_SE_NB_1
⌧ <50> := Set point command, short floating point value C_SE_NC_1
<51> := Bitstring of 32 bit C_BO_NA_1
System information in monitor direction
(Station-specific parameter)
⌧
<70> := End of initialization M_EI_NA_1
System information in control direction
(Station-specific parameter)
⌧ <100> := Interrogation command C_IC_NA_1
⌧ <101> := Counter interrogation command C_CI_NA_1
⌧ <102> := Read command C_RD_NA_1
⌧ <103> := Clock synchronization command C_CS_NA_1
⌧ <104> := Test command C_TS_NB_1
⌧ <105> := Reset process command C_RP_NC_1
⌧ <106> := Delay acquisition command Note 1
C_CD_NA_1
Parameter in control direction
(Station-specific parameter)
⌧ <110> := Parameter of measured value, normalized value P_ME_NA_1
⌧ <111> := Parameter of measured value, scaled value P_ME_NB_1
<112> := Parameter of measured value, short floating point value
P_ME_NC_1
<113> := Parameter activation P_AC_NA_1
File transfer
(Station-specific parameter)
<120> := File ready F_FR_NA_1
<121> := Section ready F_SR_NA_1
<122> := Call directory, select file, call file, call section F_SC_NA_1
<123> := Last section, last segment F_LS_NA_1
<124> := Ack file, ack section F_AF_NA_1