ProSoft Technology PTQ-104C User Manual
Ptq-104c, User manual
Advertising
Table of contents
Document Outline
- Your Feedback Please
- Information for ProTalkP®P Product Users
- Warnings
- Important Notice:
- Guide to the PTQ-104C User Manual
- 1 Start Here
- 2 Configuring the Processor with Unity Pro
- 3 Configuring the Processor with Concept
- 4 Configuring the Processor with ProWORX
- 5 Module Configuration
- 5.1 Using ProSoft Configuration Builder
- 5.2 Backplane Data Transfer
- 5.3 Data Exchange
- 5.3.1 Data Type Mapping and Addressing
- 5.3.2 Read Status (Block 9250)
- 5.3.3 User-Constructed Command Block (9901)
- 5.3.4 Command Control Block (9902)
- 5.3.5 Event Pass-Through Block (9903)
- 5.3.6 Read Command Error List Block (9950)
- 5.3.7 Get Module Date and Time Block (9970)
- 5.3.8 Set Module Time Block (9971)
- 5.3.9 Cold Boot Block (9999)
- 5.4 [SNTP CLIENT]
- 5.5 [IEC-104 Client Module]
- 5.6 [IEC-104 Client/Session x]
- 5.6.1 [IEC-104 Client/Session x > IEC-104 Client x] section
- 5.6.2 [IEC-104 Client/Session x > IEC-104 Client x Sector 0] section
- 5.6.3 [IEC-104 Client/Session x > IEC-104 Client x Sector 0] section
- 5.6.4 [IEC-104 Client/Session x > IEC-104 Client x Sector 1] section
- 5.6.5 [IEC-104 Client/Session x > IEC-104 Client x Sector 1] section
- 5.7 [IEC-104 Client Commands] section
- 5.8 [Ethernet Configuration] section
- 5.9 To Create Optional Comment Entries
- 5.10 To print a configuration file
- 6 Downloading the PCB File to the Module
- 7 Hot Standby Support
- 7.1 Hot Standby Overview
- 7.2 Setting Up the Modicon Quantum Hot Standby with Unity System
- 8 Diagnostics and Troubleshooting
- 9 Reference
- 9.1 Product Specifications
- 9.2 IEC-60870-5-104 Protocol Implementation
- 9.3 Cable Connections
- 9.4 General Module Status (Block 9250) Table
- 9.5 Client Status (Block 9251) Table
- 9.6 IEC 60870-5-104 Client Interoperability Statement
- 9.6.1 System or device
- 9.6.2 Application Layer
- 9.6.3 Selection of standard ASDUs
- 9.6.4 Type identifier and cause of transmission assignments
- 9.6.5 Basic Application Functions
- Station initialization
- Cyclic data transmission
- Read procedure
- Spontaneous transmission
- Double transmission of information objects with cause of transmission spontaneous
- Station Interrogation
- Clock synchronization
- Command transmission
- Transmission of Integrated totals
- Parameter loading
- Parameter activation
- Test procedure
- File transfer (Station-specific parameter, mark "X" if function is used)
- Background scan
- Definition of time outs
- Maximum number of outstanding I format APDUs k and latest acknowledge APDUs (w)
- Port number
- Redundant connections
- RFC 2200 suite
- 9.7 Frequently Asked Questions
- 10 Support, Service & Warranty
- Index