Completing the quantum configuration – ProSoft Technology PLX8X-MNET-61850 User Manual
Page 100
Advertising
Configuring the Quantum Processor with Unity Pro
PLX8x-MNET-61850 ♦ Communication Gateway
User Manual
Modbus TCP/IP to IEC 61850
Page 100 of 228
ProSoft Technology, Inc.
May 14, 2014
4.5
Confirming the Data Transfer
Once the steps in the previous topic have been followed it will be possible to
verify that the data is transferring.
On the next window, the table shows the ProSoft gateway
’s configured IP
address.
If it is configured correctly, then the table should show the voltage value we are
trying to send from the IED to the PLC.
This value will be read from the IED.
Advertising