Kodak i2420 - Manual (Page 9)

6 A-61756 May 2014
Cleaning the flatbed The flatbed’s glass platen can collect fingerprints and dust. Use
Staticide Wipes for Kodak Scanners (CAT No. 896 5519) and the
Optics Cleaner Pad (CAT No. 868 3724) to clean the glass platen.
IMPORTANT: Staticide wipes contain isopropanol which can cause eye
irritation and dry skin. Wash your hands with soap and
water after performing maintenance procedures. Refer to
the MSDS for more information.
1. Open the flatbed cover.
2. Wipe the glass platen with a Staticide wipe.
3. Dry the glass platen with the Optics Cleaner pad.
4. Close the flatbed cover.
IMPORTANT: Do not spray or pour cleaning liquids on the flatbed’s
glass platen, as these liquids may seep under the glass
and cause damage.