Optoma HD142X - Manual (Page 16)

English 16
sETUP anD InsTallaTIon
adjusting the projector image
Image height
The projector is equipped with elevator feet for adjusting the image height.
Locate the adjustable foot you wish to adjust on the underside of the projector. 1.
Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector. 2.
Tilt-Adjustment Feet
Tilt-Adjustment Ring
Zoom and focus
To adjust the image size, turn the zoom lever clockwise or counterclockwise to increase or decrease ‡
the projected image size.
To adjust the focus, turn the focus ring clockwise or counterclockwise until the image is sharp and
‡
legible.
Focus Ring
Zoom Lever
The projector will focus at a distance of 1.5m to 10m. notee: