2 installing the equipment, 1 introduction, 2 operating voltage – Ericsson TT1222 User Manual
Page 7: 3 power cable and earthing, Installing the equipment, Introduction, Operating voltage, Power cable and earthing, 2installing the equipment, Caution
2BInstalling the Equipment
2
Installing the Equipment
2.1
Introduction
For best performance and reliability follow the instructions for site requirements and
installation in the Reference Guide and only use installation accessories
recommended by the manufacturers.
2.2
Operating Voltage
2.2.1 AC
Models
AC models are fitted with a wide-ranging power supply. It is suitable for supply
voltages of 100-240 Vac -10% +6% at 50/60 Hz nominal.
Caution!
This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your business,
consult a qualified electrical engineer or your local power company.
Note: Refer to the Reference Guide for details of the color codes used on the
mains leads.
See Table 5 for fuse information and also the Reference Guide for a full power
supply specification.
2.3
Power Cable and Earthing
Check that the power cable is suitable for the country in which the Receiver is to be
used.
(Power Cable Information: H05VV-F, 0.75mm2, 3G or greater)
EN/LZT 790 0002/1 R1A
2011-02-21
7 (20)