Elo TouchSystems 1220L - Manual (Page 22)

21
2. Follow the directions on the screen to complete the driver setup
for your version of Windows.
If the AutoStart feature is not active:
1. Click Start > Run.
2. Click the Browse button to locate the touch.exe pro-
gram on the CD-ROM.
3. Click Open, then OK to run touch.exe.
4. Follow the directions on the screen to complete the driver
setup for your version of Windows.
Installing the Touch Driver for MS-DOS and
Windows 3.1
You must have a DOS mouse driver (MOUSE.COM) installed
for your mouse if you wish to continue using your mouse along
with your touchmonitor in DOS.
To install Windows 3. x and MS-DOS from Windows 95/98, fol-
low the directions below:
1. Insert the Elo CD-ROM in your computer’s CD-ROM drive.
2. From DOS, type d:\EloDW to change to the correct di-
rectory on the CD-ROM (your CD-ROM drive may be
mapped to a different drive letter).
3. Type install and press Enter to start the installation.
4. Align the touchscreen.
Refer to Chapter 2 of the Elo DOS and Windows Driver Guide
as necessary for additional installation information. The driver
guide can be found on Elo’s web site at www.elotouch.com.