Eclipse - Fujitsu Ten Mainboard D2140 - Manual (Page 10)

A26361-D2140-Z120-1-7419, edition 1 English - 1
Mainboard D2140
Your mainboard is available in different configuration levels. Depending on the configuration chosen,
some of the hardware components described may not be available on your mainboard.
Additional information
Information on the BIOS Setup and additional descriptions of the drivers are contained:
●
in the readme files on your hard disk
● on the driver floppy disks included
● on the CD "Drivers & Utilities Collection" or "Drivers & Utilities" or "ServerStart".
i
The programme Acrobat Reader must be installed to be able to open the manuals. You will
find the programme on the CD-ROM directory: utls/acrobat.
For more details please read the according readme.txt files.
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
!
indicates information which is important for your health or for preventing physical damage.
i indicates additional information which is required to use the system properly.
► Text which follows this symbol describes activities that must be performed in the order shown.
↵ This symbol indicates that you must press the Enter key.
└┘
This symbol indicates that you must enter a blank space (press the Space Bar) at this point.
Text in this typeface indicates screen outputs.
Text in this bold typeface indicates the entries you make via the keyboard.
Text in italics indicates commands or menu items.
"Quotation marks" indicate names of chapters or terms.