Ab c – MIDEA MDT24H3AST User Manual
Page 31
31
Saf
ety
Pr
ecautions
Oper
a
ting
R
equir
ements
P
arts and
F
ea
tur
es
S
tart Up
Guide
C
ontr
ols
Dish
w
asher
L
oading
Dish
w
asher
Use
Dish
w
asher
Car
e
Tr
oubleshooting
RINSE AID DISPENSER
Under normal conditions, you will need to fill the rinse aid dispenser
approximately once a month. Rinse aid is released through an opening in
the dispenser. You do not need to wait until the dispenser is empty to refill
it. Try to keep it full, but be careful not to overfill it.
1.
Open the dishwasher door.
2.
Turn the rinse aid dispenser cap counterclockwise and pull up to
remove.
Full
Add
3.
Pour rinse aid into the dispenser until the sight window indicates FULL.
4.
You can adjust the amount of the rinse aid released during the rinse.
The higher the number the greater the amount of rinse aid released.
•
If your glassware has spots following the cycle, increase the rinse
aid setting.
•
If your glassware has streaks after the cycle, decrease the rinse aid
setting.
a
b
c
a
Dispenser Cap
b
Less
c
More
5.
Clean up any spilled rinse aid with a damp cloth.
6.
Replace the rinse aid cap, and then turn the cap clockwise to close.