Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory - Manual (Page 111)

Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
111
Configuring the Functions to Assign to the Pads and Footswitch, and Configuring
the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall
(CONTROL SETUP)
1. Select [MENU] Ó “SYSTEM”.
2. Use the cursor [ а ] [ б ] [ г ] [ в ] buttons to select “CONTROL SETUP” and press the [ENTER] button.
The CONTROL SETUP screen appears.
3. Use the [F1]–[F5] buttons to switch between settings screens.
Button Explanation
[F1] (PAD) Assigns functions to the pads on this unit.
[F2] (TRIG IN) Assigns functions to drum triggers connected to the TRIGGER IN 1–8 jacks.
[F3] (FOOT SW) Assigns functions to a footswitch.
[F4] (PAD EDIT KNOB) Configures the PAD EDIT knob settings for the SPD-SX PRO overall.
[F5] (EXP PEDAL) Configures the expression pedal settings for the SPD-SX PRO overall.
4. Use the cursor [ а ] [ б ] buttons to select a parameter, and then use the [-] [+] buttons to change the
setting.
PAD/TRIG IN/FOOT SW
Parameter Value Explanation
PAD 1–9 Control Assigns functions to pads 1–9.