Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory - Manual (Page 192)

Effect List
192
Lo-fi effects
LOFI Compress
(P.192)
Bit Crusher
(P.193)
LOFI Compress
Degrades the sound quality.
Parameter Value Explanation
Pre Filter Type
1, 2, 3, 4, 5, 6 Selects the type of filter applied to the sound before
it passes through the Lo-Fi effect.
1: Compressor off
2–6: Compressor on
LoFi Type
1, 2, 3, 4, 5, 6, 7, 8, 9 Degrades the sound quality. The sound quality grows
poorer as this value is increased.
Post Filter
Type
OFF, LPF, HPF Selects the type of filter applied to the sound after it
passes through the Lo-Fi effect.
OFF: No filter is used.
LPF: Cuts the frequency range above the Cutoff Freq
HPF: Cuts the frequency range below the Cutoff Freq
Post Filter
Cutoff
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000,
2500, 3150, 4000, 5000, 6300, 8000 [Hz]
Basic frequency of the Post Filter
Low Gain -15–+15 [dB] Gain of the low range
High Gain -15–+15 [dB] Gain of the high range
Balance (*1)
D100:0W–D0:100W Volume balance between the direct sound (D) and
the effect sound (W)
Level 0–127 Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “ Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
Ctrl) (P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “ Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL) (P.199)”.